Supervisor Password; User Password - DTK PAM-0050S User Manual

118
5.9

SUPERVISOR PASSWORD

Two level of password is supported. Depending on the setting of the
"Security Option" in the "BIOS FEATURES SETUP", the system BIOS will
ask for password every time booting up the System or entering BIOS Setup.
With the supervisor password, both the system booting and BIOS setup
changing is allowed.
This main menu item lets the user to set up the Supervisor Password.
Change the password as follows:
1. Choose "PASSWORD SETTING" in the Main Menu and press
<Enter>. The following message appears:
2.
message appears:
Important:

5.10 USER PASSWORD

With the user password, only booting up the system is accepted, but
changing the BIOS setup is not allowed.
"ENTER PASSWORD:"
Enter the Password and press <Enter>. The following
"CONFIRM PASSWORD:"
Keep a safe record of the new password. If forget or
lose the password, the only way to access the system is
to disconnect the CMOS batteries and then re-enter the
password.
Chapter 5