J15 - Cd-Rom Audio Connector (Mitsumi/Panasonic); J16, Ja1 - Cpu, System/Power Supply Fan Connector; J19 - Floppy Drive Controller; Jp5 - Wake Up On Lan - DTK PRM-0082I User Manual

Chapter 3
3.9 J15 – CD-ROM AUDIO CONNECTOR
(MITSUMI/PANASONIC)
3.10 J16, JA1 – CPU, SYSTEM/POWER SUPPLY FAN
CONNECTOR
J16 is a three-pin connector, which is used to connect with the CPU Fan Power
cable. JA1 is another three-pin connector for optional System/Power Supply Fan.

3.11 J19 - FLOPPY DRIVE CONTROLLER

This connector supports the floppy drive ribbon cable. After connecting the single
end to the board, connect the two plugs on the other end to the floppy drive.
3.12 JP5 – WAKE UP ON LAN

3.13 SLOT 1 FOR PENTIUM II CPU

14
Fig. 10 CD-ROM Audio
Fig. 11 Wake up On LAN
Fig. 12 Slot 1 for Pentium CPU