DTK PAM-0050S User Manual page 117

Award BIOS Setup Guide 109
Slow Refresh (1:4): To enable this function will allow the DRAM refresh in a
slower rate.
Video BIOS Cacheable: It is used to enable or disable the Video BIOS being
cacheable.
Memory Hole At 15M-16M: To enable this function will allow the VGA
controller to rung larger frame port.
CPU-PCI Post Write Rate: This option is used to control the timing of the CPU
to PCI Post Write buffer. The available option is "3 Ck" and "4 Ck", and the default
value is "4 Ck".
VGA Share Memory Size: If external VGA card is installed, this option will not be
shown. It is used to select the video ram size shared with the system memory, the
available options are "0.5MB", "1MB", "1.5MB" and "2MB".
VGA Memory Clock (MHz): If external VGA card is installed, this option will not
be shown. It is used to select the VGA memory clock frequency of the on-board
graphics controller used. The available frequency ranges from 40MHz to 70MHz.
The default value is 55MHz.
Linear Mode SRAM Support: This option is shown only when Cyrix 6x86 is
used. If Cyrix 6x86 is installed, this option is recommended as "Enabled" and JP7
should be shorted.
Latency for CPU-PCI: It is used to control the latency of the CPU to PCI cycle.
The available optionis "1 Ck" and "2 Ck", and the default value is "2 Ck".
CPU-PCI Burst Menu Write: It is used to enable or disable the CPU to PCI Burst
Memory Write.
CPU-PCI Post Memu Write: It is used to enable or disable the CPU-PCI Post
Memory Write.