Table of Contents
Advertisement
Award BIOS Setup Guide
5.13 SCSI HARD DISK INSTALLATION
In Standard CMOS Setup Utility, select hard disk type to be "Not Installed".
In Advanced CMOS Setup Utility, Disable "Adapter ROM Shadow DC00".
On the SCSI Controller card, set the jumpers which configure the SCSI
card BIOS segment address located at DC00 or DE00. Format the SCSI
disk by the Formatter provided in the SCSI BIOS.
5.14 SAVE & EXIT SETUP MENU
When you select this function, the following message will appear at the
centre of the screen to assist you to Save data to CMOS and Exit the Setup.
5.15 EXIT WITHOUT SAVING MENU
When you select this function, the following message will appear at the
centre of the screen to assist you to Abandon all Data and Exit Setup.
Save to CMOS and Exit (Y/N)?
Quit Without Saving (Y/N)?
123
Advertisement
Table of Contents
