Jp1 - Irda Connector; Jp8 - Atx Power Supply Connector; Jp10 - Floppy Drive Controller - DTK PRM-89I User Manual

Chapter 3
3.1

JP1 - IrDA CONNECTOR

JP1 is an IrDA connector that use UART2 as interface of IrDA Infrared and ASKIR.
3.2

JP8 - ATX POWER SUPPLY CONNECTOR

3.3

JP10 - FLOPPY DRIVE CONTROLLER

This connector supports the floppy drive ribbon cable. After connecting the single
end to the board, connect the two plugs on the other end to the floppy drive.
8
Fig. 4 IrDA Connector
Fig. 5 ATX Power Supply Connector