Using The Tone Controls; The Audio Mixer - DTK PAM-0050S User Manual

High performance pentium pci mainboard

Table of Contents

Software Installation

It has four settings to converts sound from the AudioRack32 into a 3-D

sound:

Max:

provides greatest effect, works best with games.

Mid:

works best with most audio CDs and music (Default setting).

Min:

works best with some audio CDs.

Off:

no spatialization, normal stereo.

There are two ways to set the Spatial Control. First, you may click on the

label of the setting you wish to set the control to. The second way is to

click on the dial at the point at which you want the dial to be set.

4.4.4.5 USING THE TONE CONTROLS

Tone Controls, Bass and Treble. You can turn these controls on and off by

clicking on their toggle switches labeled with Bass or Treble. Then use the

slider located to the right of the label to control the amount of Bass or

Treble. Once you have selected one of the sliders you can use the up and

down arrow keys on your keyboard to increase or decrease the amount of

Bass or Treble.

Table of Contents