Table of Contents
Advertisement
104
Chapter 5
External Cache: Choose Enabled or Disabled. This option lets user choose
whether to use secondary cache memory. The default is Enabled.
Quick Power On Self Test: Choose Enabled or Disabled. This option let the
POST sequence runs longer for through tests.
Boot Sequence: With the default setting the BIOS first attempts to boot from drive
A: and then, if unsuccessful, from hard disk C:. User can reverse this sequence with
"C: A:", but then drive A: cannot boot directly.
Swap Floppy Drive: Choose Enabled or Disabled. This option lets end users to
change the Drive A: or B: to others.
Boot Up Floppy Seek: Choose Enabled or Disabled. "Disabled" provides a fast
boot and reduces the possibility of damage to the heads.
Boot Up NumLock Status: Choose On or Off. On puts numeric keypad in Num
Lock mode at boot-up. Off puts numeric keypad in arrow key mode at boot-up.
Boot Up System Speed: Choose High or Low. Set the CPU timing at Boot Up, the
default is high.
Gate A20 Option: Choose Fast or Slow. The system switch back an forth from
real mode to virtue mode, fast means the system will switch through logic, slow
through keyboard. The default is Fast.
Typematic Rate Setting: Choose Enabled or Disabled. Enabled will determines
the typematic rate defined by following two options.
Typematic Rate: The number selected 6,8,10... indicates how fast the number of
characters can response in one second.
Typematic Delay (Msec): The number selected indicates the time period between
two identical keys appear.
Advertisement
Table of Contents
