DTK PAM-0050S User Manual page 100

92
4.4.9.8.4 RECORDING NEW AUDIO AND PLACING IT ON THE
CLIPBOARD
1. Place the cursor at the end of the waveform display, or play the file to the end.
2. With input source(s) ready, click the Record button to record new material.
Click the Stop button to finish.
3. Use the mouse to select the section just recorded, then click the Cut or Copy
button to put that audio section onto the Clipboard.
4.4.9.8.5 INSERTING AUDIO FROM THE CLIPBOARD
1. Place the cursor at the point in the waveform display where you want to insert
audio from the Clipboard.
2. Click the Paste button. The Clipboard audio waveform appears at the cursor. No
audio is erased.
4.4.9.8.6 REPLACING THE SELECTED AUDIO WITH CLIPBOARD
AUDIO
1. Use the mouse to select the waveform of the audio to be replaced.
2. Click the Paste button. The Clipboard audio appears in place of the selected
audio.
4.4.9.8.7 MIXING CLIPBOARD AUDIO WITH THE SELECTED AUDIO
1. Place the cursor at the beginning of the audio to be mixed, or select a section
of audio to be mixed.
Chapter 4