Table of Contents
Advertisement
Software Installation
61
Each source has a balance slider. However, if your hardware doesn't
support stereo, you cannot affect the balance. Selecting a balance slider
and using the left and right arrow keys on your keyboard enables you to
change the balance as well. Before adjusting the balance on a wave file, be
sure the file is in stereo, not mono.
Each source also has a Mute button with the name of the source on it. Click
the button to toggle the mute on or off. When the green light is on, the
channel is active; when the green light is blackened, no sound will come out
of that channel. It's a good idea to check that your Mute buttons are lit if
you aren't getting the sound you expect.
Because your Playback mode and Record mode settings can be different, it
can be useful to click Monitor while you are recording. This enables you
to hear your recording as the Digital Audio Player "hears" it. Remember
that Monitor will be disabled while you are in Playback mode. You must
be in Record mode to turn the monitor on or off.
Advertisement
Table of Contents
