FlowLine DataView LI55 Series Quick Start Manual page 27

DataView™ LI55 Level Controller
|
Disable Password Protection
3. Press ENTER and 000000 will appear. Press Right to move the highlighted digit to
the right and Up to increase the Password value. Enter the correct six-digit
password.
4. Press ENTER and Unlocked (
a. If the password is incorrect, the display will message Locked (Locd) for
two seconds, and then return to the Run Mode. To try again, press Enter
while the Locked (Locd) message is displayed.
Master Password
If you forgot the password, the password may be disabled by entering a master
password once. If authorized, enter the master password 508655 to unlock the
controller.
QS301033 Rev C1
unLoc
) will appear.
Quick Start
27