Table of Contents
Advertisement
July 2019 – TD 304 OPERATING MANUAL – Doppler Current Profiler Sensor
Figure 3-15: Deployment Settings
The
Deployment Settings
separated in 9 groups. The settings in
this groups are mainly used as
information or values used in internal
calculations.
Refer chapter
1.7.2
for more
information on the properties in
Deployment Settings
If the surface cell, surface reference
or acoustic wave is enabled, we
always recommend using a pressure,
tide or wave sensor.
A input parameter will be used in
calculation if available and selected.
NOTE!
Do not use the DCPS as an external
reference, Input Parameter Sensor ID
even if it is available in the list
For more information on each
property see chapter
3.5.1
Page 69
is
to
3.5.9.
Advertisement
Table of Contents
