Page 44
Figure 2-20: System Configuration, part 2
July 2019 – TD 304 OPERATING MANUAL – Doppler Current Profiler Sensor
In the second half of the
Configuration
menu you will find
mainly setting that will control the
output
If
User Specified
is selected
under
"Output – Profile
Parameters>Select Profile
Parameters
then the individual
selection in the next menu
Specified – Profile Parameters
will be valid. For all other settings
Select Profile Parameters
in
selections of parameters in
Specified – Profile Parameters
will be overruled.
User Specified – Profile
NOTE!!
Parameters
are only valid when
Select Profile Parameter
to
User Specified,
The selection for each property
in these menus will also be
dependent on the mode setting.
System
User
the
User
is set