Aanderaa DCPS 5400 Operating Manual page 38

Page 38
Figure 2-10 Confirm Configuration Changes
Figure 2-11 Configuration Update
July 2019 – TD 304 OPERATING MANUAL – Doppler Current Profiler Sensor
In the next picture a list of all
properties that has been changed
will show up.
If the list of configuration changes
is correct press Next to start the
update process.
An automatic process will
start with 6 steps
transferring and storing the
new information/setting in
the sensor Flash. If
necessary a reset will be
executed. Do not switch off
before the entire process is
completed.