TESTO 6383 Instruction Manual page 52

4 Transmitter
In addition, the analog outputs can be adjusted. For instructions on
how to do this. See also 4.3.2.10. Analog output adjustment. See
also 4.3.2.13. Self adjustment of testo 6615 trace humidity probe.
Also pay attention to 4.3.2.10. Analog output adjustment.
Enter reference value for 1-point adjustment
Please also 4.3.2.8. refer to 1-point adjustment (offset -
humidity/temperature).
1. In the Measuring Mode press SET, select main menu
with  or  and confirm selection with SET.
Reference value % RH
-
2. Press SET, edit value: Scroll one digit to the right using  and
increase value of digit by 1 using . Confirm with
entry with ESC.
3. Continue to
4. Press SET,
displayed.
5. Press SET, edit value: Scroll one digit to the right using  and
increase value of digit by 1 using . Confirm with
entry with ESC.
6. Continue to
7. Continue with the adjustment of the analog outputs (see below,
step 2) or press
8. Continue to main menu
Measuring Mode with ESC.
Carrying out a 2-point adjustment
1. In measurement mode, press SET, select
with  or  and confirm selection with SET.
2. Continue to
or .
3. Press SET.
4. Continue to
Point 75%/Adjust Point 80%
5. Confirm query with SET.
- In the display,
point
- After a probe reset, the adapted values appear.
Start self-adjustment
52
Reference value temp
Reference value °C
Analog Adj. Ch. 1
ESC to return to main menu Adjust.
2 point adj 11/75%
Adjust Point 11%/Adjust Point 20%
2 point adj 11/75%
adjustment, Probe reset
The menu item self-adjustment is only visible when a
testo 6615 probe is connected.
is displayed.
with  or .
or Reference value °F
with  or .
Reset
with  or  or return to
or 2 point adj 20/80%
with  or .
2 point adj
or
appear one after the other.
Adjust
SET or abort
is
SET or abort
Main Menu Adjust
with 
Adjust
or
20/80%, 1-