TESTO 6383 Instruction Manual page 126

7 Parameterizing, adjusting and analyzing software (P2A software)
4. Click on
wizard.
- The adjustment is performed when the wizard is closed.
Field
Default value
Measured analog
value
126
[Start wizard ...]
Explanation
The analog output value from the last
performed adjustment is given at the output.
Value of the factory adjustment:
• Lower adjustment point: approx. 10 % of
the max. value
• Centre adjustment point: approx. 50 % of
the max. value
• Upper adjustment point: approx. 90 % of
the max. value
Required field: Entry of the value read off at
the multimeter.
and follow the instructions of the