TESTO 6383 Instruction Manual page 123

7 Parameterizing, adjusting and analyzing software (P2A software)
5. Confirm confirmation request.
- The adjustment is carried out.
Field
°C/°F
Current reading
Reference value
[Set offset to zero]
> Click on
value.
- The current reading is used again.
6. Click on [OK]
Explanation
Selection of the unit; only for temperature
adjustment.
Reading in °C/°F or % RH.
Readings are updated every second.
Entry of the read-off value from the reference
measuring instrument.
Permissible entries:
• max. 5 % RH deviation (sum of all 1-point
adjustments)
• max. 2 K (°C) deviation (sum of all 1-point
adjustments)
to reset a transmitted reference
or [Cancel] to close the dialogue.
123