7 Parameterizing, adjusting and analyzing software (P2A software)
Field
Display brightness
(0 to 9)
Display contrast
(0 to 9)
Display of the error
messages
Display language
New password
[Adopt new
password]
Valid password
Field
Zeroing cycle
114
Explanation
Setting the brightness between 0 and 9:
0 = dark
9 = light
Setting the contrast between 0 and 9:
0 = low contrast
9 = high contrast
Selection of whether the error messages
should be shown in the display.
Selection of the language.
The password consists of four numbers,
each of which must be between 1 and 9.
If the password protection is not to be used,
the numerical code "0000" must be entered.
Button for confirming the new password.
Display of the current password.
Explanation
Setting the interval of the automatic zeroing
with solenoid valve.
The accuracy specifications are only valid for the zeroing
cycle of 15 sec set by the factory.