Avanti Insert (Bv & Dv) Blower Removal; Heritage Bay Insert Blower Removal; Spirit Bay Insert Blower Removal - Travis Industries Spirit 300 GS Service Manual

5 - 4
Avanti Insert (DV or B-V) Blower Removal
Warning Make sure the power cord is disconnected prior to conducting service.
Warning Shut off all gas and disconnect the gas line from the heater.
1 Remove the insert from the fireplace (remove the panels, glass and logs first to prevent
damage while moving the insert).
2 With the left rear of the heater exposed, the blower assembly can be accessed. Follow
the directions on page 5-5 (A20 Blower Assembly Removal & Disassembly) to remove the
blower from the heater.

Heritage Bay Insert Blower Removal

Warning Make sure the power cord is disconnected prior to conducting service.
Warning Shut off all gas and disconnect the gas line from the heater.
1 Remove the insert from the fireplace (remove the panels, glass and logs first to prevent
damage while moving the insert).
2 With the left rear of the heater exposed, the blower assembly can be accessed. Follow
the directions on page 5-5 (A20 Blower Assembly Removal & Disassembly) to remove the
blower from the heater.
Sprit Bay Insert Blower Removal
Warning Make sure the power cord is disconnected prior to conducting service.
Warning Shut off all gas and disconnect the gas line from the heater.
1 Remove the insert from the fireplace (remove the panels, glass and logs first to prevent
damage while moving the insert).
2 With the left rear of the heater exposed, the blower assembly can be accessed. Follow
the directions on page 5-5 (A20 Blower Assembly Removal & Disassembly) to remove the
blower from the heater.
Travis Industries
Blower Components
Gas T-Shoot Guide 19203