Grizzly G1014Z Owner's Manual page 23

Leg
Lip
Long Upper Brace
Figure 18. Stand legs fastened to long braces.
Note: Make sure the lip on the long braces
faces up.
4. Repeat Step 3 to fasten the (2) remaining
long upper and long lower braces to the
remaining stand legs.
5. Fasten the (2) short upper braces and the (2)
short lower braces to (1) of the leg assem-
blies with (8) ⁄ "-18 x
5
16
18 hex nuts, and ⁄
5
in Figure 19.
Short Lower
Brace
Short
Upper
Braces
Figure 19. Short upper and lower braces
fastened to leg assembly.
Model G1014Z/G1014ZX (Mfd. Since 08/22)
Long Lower Brace
x 8
⁄ " carriage bolts, ⁄
1 5
2 16
" flat washers, as shown
16
x 8
Note: Make sure the (2) short upper braces
overlap the long upper braces and that the
braces are placed inside the leg assemblies,
as shown in Figure 20.
Short Upper Brace
Long Upper Brace
Figure 20. Short brace overlapping long upper
6. Fasten the second leg assembly to the
braces on the first leg assembly with the
remaining (8)
⁄ "-18 hex nuts, and
5
16
place the stand upright on its feet, as shown
"-
in Figure 21.
Figure 21. Stand assembled.
7.
Final tighten all the fasteners on the stand.
8. Tighten the hex nuts on the feet.
Area of Overlap
brace.
⁄ "-18 x ⁄ " carriage bolts,
5 1
16 2
⁄ " flat washers, then
5
16
-21-