Operation; Resetting The Saved Overload Indication - ABB i-bus KNX SU/S 30.640.2 Product Manual

ABB i-bus ® KNX

Operation

9 Operation
9.1

Resetting the saved overload indication

Press the Reset button to perform a reset. The overload indication and the fault signaling relay will be
reset. The bus connection terminal must be disconnected from the Power Supply to de-energize the bus
line.
For more information, see chapter 4.3.
SU/S 30.640.2 | 9AKK107992A4580_EN Rev. A 31