Endress+Hauser Fieldbus levelflex M FMP 40 Operating Instructions Manual page 51

Levelflex M FMP 40 with Foundation Fieldbus
Endress+Hauser
Simulation
The SIMULATE parameter allows the transducer block output value to be simulated,
provided simulation has also been enabled at the device DIP switch. The simulation
must be enabled, a value and/or status entered and the block must be in AUTO mode.
During simulation the transducer output value is substituted by the simulated value.
A simulation is also possible by switching MODE_BLK to "MAN" and entering a value for
OUT.
Parameter Description
SIMULATE Enables, sets and displays a simulated value, options:
– enable/disable
– simulated value
– output value
5 Operation
51