Install A Power Supply - Dell EMC PowerStore 500T Installation And Service Manual

Figure 40. Removing a power supply

Install a power supply

About this task
The power supplies are installed in the top and bottom nodes, meaning that the top power supply is installed upside-down. This
procedure works for installing either power supply.
Steps
1. Align the power supply with the slot in the node.
2. Push the power supply into the node until it clicks into place.
Figure 41. Installing a power supply
3. Connect the power cable to the power supply and secure the cord with the retention bail at the connector.
44 Base enclosure service procedures
0
1
2
3
1