Verify The Operation Of A Replacement Access Module; Return A Faulted Part - Dell EMC PowerStore 500T Installation And Service Manual

Figure 122. Locking the Access Module into place
3. Connect the cables to the Access Module.

Verify the operation of a replacement Access Module

Steps
1. From PowerStore Manager, select Hardware.
2. Select the appliance where you replaced the Access Module.
3. On the Components card, under Rear View, expand ExpansionEnclosure.
4. Select the relevant Access Module.
The status of the replacement Access Module should read Healthy. If the status is still Faulted, wait a few minutes and
refresh PowerStore Manager. If the status does not change, ensure that the Access Module is correctly seated, or contact
your service provider.

Return a faulted part

About this task
For US customers, return defective material within five business days. For International customers, return defective material
within 10 business days. The materials required to return your defective part are supplied with the good part shipment.
Steps
1. Package the faulted part in the shipping box that contained the replacement part.
2. Ship the failed part to your service provider as described in the instructions that were included with the replacement part.
3. For more information about returning customer-replaceable parts:
a. Open PowerStore Manager.
b. Click Settings on the upper right of the screen.
c. Click General Support.
d. Under Drives, Power Supplies, and Other Parts, click Return Part.
e. If your screen does not show the Return Part link, contact your service provider for instructions.
106 NVMe expansion enclosure service procedures