Add An Nvme Expansion Enclosure; Summary Of Tasks For Adding An Expansion Enclosure; Verify Shipping Package Contents - Dell EMC PowerStore 500T Installation And Service Manual

Figure 20. Installing the bezel

Add an NVMe expansion enclosure

Take the following actions to add an NVMe expansion enclosure to a running system with existing expansion enclosures.
NOTE: If this is the first NVMe expansion enclosure, refer to

Summary of tasks for adding an expansion enclosure

To add an expansion enclosure to a running system, complete the tasks below in the order in which they appear. This document
provides instructions for completing each task.
NOTE: When adding an expansion enclosure to a running system, you must power on the expansion enclosure before
attaching the back-end cables.
1. Verify the contents of the shipping package.
2. Choose the space in the cabinet for the new expansion enclosure.
3. Remove the filler panels that cover the cabinet space for the new expansion enclosure.
4. Install the rails for the new expansion enclosure in the cabinet.
5. Install the expansion enclosure on the rails.
6. Install the cable management arms.
7. Apply cable labels.
8. Attach the power cables to the new expansion enclosure.
9. Attach the expansion (back-end) cables to the new expansion enclosure.
10. Close the cable management arms.
11. Test the cable management arms.
12. If the new expansion enclosure shipped without its drives installed, install the drives in the expansion enclosure.
13. Install the front bezel on the new expansion enclosure.

Verify shipping package contents

Confirm that you received all the equipment that is required to install the new NVMe expansion enclosure.
Verify that you received the following:
Install an ENS24 expansion
Install a new base enclosure and optional expansion enclosure
CL5262
enclosure.
25