PAX-324-C2A-NAR
(1) DC POWER Input: +24V Power Connector
(2) DVI 1 Input / Output
(3) DP/HDMI Input
(4) USB UP
PAX-324-C2A-NBS, PAX-324-C2A-NBR
(1) DC POWER Input: +24V Power Connector
(2) SDI 1 Input / Output
(3) DVI 1 Output / Input
(4) DP/HDMI Input
(5) USB UP
2.2.5
Interface on AVAS Back Panel
Name
SFP+
Status LED
1GbE
Note!
If the power supply cord is unplugged from the power outlet, the AVAS
will be disconnected. The power outlet socket should be located near
the equipment and easily accessible.
2.3
Viewing Angle
The PAX-324 LCD monitor can be vertically adjusted to the preferred viewing angle
for maximum comfort.
Caution! Do not force the monitor past its maximum extension in any direction as
this may damage the monitor and the monitor stand.
PAX-324-C2 User Manual
Function
SFP+ port for SFP+ modules only.
Status LED, will indicate the AVAS operational status:
a. Blinking green: operating as normal.
b. Blinking orange: warning notification.
c. Continuous orange: FPGA is starting-up.
d. Blinking red: error notification.
e. Off: no power supplied to the AVAS.
1GbE (RJ45) has no function yet.
16