Cleaning The Lcd Panel; Cleaning The Cabinet; Safety; Keep Away From A Window - Advantech PAX-355-C8 Series User Manual

Note!
If software tools are provided by Advantech they should be operated
using the specific instructions provided. Any software tools provided
should only be installed on a computer with appropriate systems to pre-
vent unauthorized access. It is recommended to install anti-virus soft-
ware and not connect to unsafe external networks.
Note! In case of any serious incident that has occurred, please contact the
manufacturer and the authorities immediately.
4.4

Cleaning the LCD Panel

When the liquid crystal panel becomes dusty or dirty, wipe gently with a soft

cloth.
Do not rub the LCD panel with a hard or coarse material.

Do not apply pressure to the LCD surface.

Do not use OA cleaner as it will cause deterioration or discolor the LCD surface.

4.5

Cleaning the Cabinet

Firstly, unplug the power supply.

Gently wipe the cabinet with a soft cloth.

Dampen a cloth with a neutral detergent and water, wipe the cabinet and then

dry with a soft cloth.
Note! Many plastics are used on the surface of the cabinet. Do not clean with
benzene, thinner, alkaline detergent, alcoholic system detergent, glass
cleaner, wax, polish cleaner, soap powder, or insecticide. Do not place
rubber or vinyl against the cabinet for long periods. These types of fluids
and fabrics can cause the paint to deteriorate, crack or peel.
4.6

Safety

This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful
interference to other devices in the vicinity. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to other devices, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
– Reorient or relocate the receiving device.
– Increase the separation between the equipment.
– Connect the equipment into an outlet on a circuit different from that to which
the other device(s) are connected.
– Consult the manufacturer or field service technician for help.
4.7

Keep away from a Window

Do not place your LCD Monitor near a window to prevent the Monitor from being

exposed to rain, water, moisture or sunlight that can severely damage it.
PAX-355-C8 User Manual 28