PAX-327-C2C-LAS (RGB, 2nd SDI option)
1.
DC SWITCH
2.
DC POWER Input: +24V Power Connector
3.
DC POWER Output: +5V/+12V Power Connector
4.
RS-232C
5.
SDI 1 Input / Output
6.
S-VIDEO Input / Output
7.
VIDEO Input / Output
8.
DVI 2 Input / Output
9.
DVI 1 Input / Output
10.
DP/HDMI Input
11.
USB UP
12.
RGB Input
13.
AUDIO Input / Output
14.
2nd SDI Input / Output
2.2.5
Interface on AVAS Back Panel
Name
SFP+
Status LED
1GbE
Note!
The power outlet socket should be located near the equipment and eas-
ily accessible.
2.2.6
Interface on the wireless HDMI
Connect the PC HDMI port to the Wireless HDMI Transmitter IN port and power the
transmitter with a dedicated adapter.
To display the wireless HDMI screen, select the input source as 'Auto' or 'AVAS'.
If you have input other than AVAS, please select the input source as 'AVAS'.
Note!
If there is no signal while connecting to this interface
2.2.7
Interface on 2nd SDI
To display the 2nd SDI screen, select the input source as 'Auto' or 'AVAS'.
If you have input other than AVAS, please select the input source as 'AVAS'. "
PAX-327-C2 User Manual
Function
SFP+ port for SFP+ modules only.
Status LED, will indicate the AVAS operational status:
a. Blinking green: operating as normal
b. Blinking orange: warning notification
c. Continuous orange: FPGA is starting up
d. Blinking red: error notification
e. Off: no power supplied to the AVAS
1GbE (RJ45) has no function yet.
No DPMS mode.
No other input can be selected automatically.
16