12 Start-up
12
Start-up
Note: An external door stop is to be installed to prevent the door from over travel.
12.1
Spring pre-tension
The spring pre-tension is factory set to either size #2 PUSH / PULL or size #4 PUSH. Adjust the spring
according to the following information.
12.2
App
Connect mains power (the operator will find its closed position) and make sure the LED is on.
Before the learning procedure starts, make sure that the door has been properly closed i.e., not by
force.
12.2.1
Install the app
Download the ASSA ABLOY Swing Door Manager app from the Google Play or iOS App Store.
38
Issue 2020-10-27
1020004-en-US-2.0