Setup - Toro Greensmaster eFlex 2120 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
10
Media and Additional Parts
Description
Operator's Manual
Declaration of Conformity
Noise rating certificate
Note:
Determine the left and right sides of the
machine from the normal operating position.
Description
Target plate
No parts required
Bolt (3/8 x 3/4 inch)
Handle retainer
Hairpin cotter
No parts required
Transport wheels—Transport Wheel Kit
(Model No. 04123 [Optional])
Production-year decal
Grass basket
No parts required
No parts required
Qty.
1
–
2
2
2
–
2
1
1
–
–
Qty.
1 Review the manual before operating the machine.
1
For CE compliance
1
7
Use
Install the target plate.
Prepare the traction unit (optional).
Install the cutting unit to the traction unit.
Install the handle retainers.
Adjust the EZ-Turn sensor.
Install the transport wheels.
Install the production-year decal
Install the grass basket.
Mount the battery charger on a wall
(optional).
Break in the machine.
Use