Toro Greensmaster eFlex 2120 Operator's Manual page 2

Traction unit
Hide thumbs Also See for Greensmaster eFlex 2120:
Table of Contents

Advertisement

This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
WARNING
CALIFORNIA
Proposition 65 Warning
The power cord on this product contains
lead, a chemical known to the State
of California to cause birth defects
or other reproductive harm. Wash
hands after handling.
Battery posts, terminals, and related
accessories contain lead and lead
compounds, chemicals known to
the State of California to cause
cancer and reproductive harm. Wash
hands after handling.
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Introduction
This machine is a walk-behind, reel-blade lawn mower
intended to be used by professional, hired operators
in commercial applications. It is primarily designed
for cutting grass on well-maintained turf. Using this
product for purposes other than its intended use could
prove dangerous to you and bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit
www.Toro.com
for product safety and operation
training materials, accessory information, help finding
a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an authorized Toro
distributor and have the model and serial numbers of
your product ready. The model and serial numbers
are located on a plate on the rear frame. Write the
numbers in the space provided.
Important:
With your mobile device, you can
scan the QR code (if equipped) on the serial
number decal to access warranty, parts, and other
product information.
© 2020—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
1. Model and serial number location
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
2
Figure 1
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g258525
g000502

Advertisement

Table of Contents
loading

Table of Contents