Using The Infocenter Lcd Display - Toro Greensmaster eFlex 2120 Operator's Manual

4. When finished, rotate the lever forward to
engage the transmission to the drum.
Note:
The service brake is still operational with the
transmission disengaged from the drum.
Using the InfoCenter LCD
Display
The InfoCenter LCD display shows information about
your machine such as the current battery charge, the
speed, various diagnostics, and other information
about the machine and the battery pack.
illustrates the InfoCenter and the main information
screen.
1. Power light/fault indicator
2. Battery charge indicator
3. Fault log indicator
4. Speed control setting
•
Power light/fault indicator—illuminates when you
turn the machine on. This light also blinks when
there is a machine fault.
•
Battery charge indicator—when the battery has
a full charge, all of the boxes in the indicator will
be filled in with black. As power is used, boxes
will be filled with white starting from the right
and proceeding to the left as the battery drains.
When only 1 box is still black the battery pack is
almost out of power; the machine enters a power
reduction mode which limits the throttle speed by
25%. You should immediately proceed to charge
the battery.
•
Fault log indicator—this icon indicates that there is
a current fault log to review.
•
Speed control setting—the bars turn black from
left to right the faster you set the speed control.
When all bars are filled with white, the machine is
at zero speed.
Figure 29
Figure 29
5. Menu access/back button
6. Down button
7. Right button
•
Menu access/back button—press this button to
access the InfoCenter menus. You can also use it
to back out of any menu you are currently using.
•
Down button—use this button to scroll down
menus.
•
Right button—use this button to open a menu
where a right arrow indicated additional content.
Note:
The purpose of each button may change
depending on what is required at the time. Each
button has a label with an icon displaying its current
function.
Using the Menus
To access the InfoCenter menu system, press the
menu access button while at the main screen. This
will bring you to the main menu. Refer to the following
tables for a synopsis of the options available from
the menus:
Main Menu
Menu Item
Faults
Service
g017282
Diagnostics
About
Settings
Service Menu
Menu Item
Hours
Mow Time
Power Use
Battery Charge
Battery Current
Battery Volts
Energy
25
Description
The Faults menu contains a list of the recent
machine faults. Refer to the Service Manual
or your authorized Toro distributor for more
information on the Faults menu and the
information contained there.
The Service menu contains information on
the machine such as hours of use and battery
usage and status.
The Diagnostics menu lists various states
that the machine currently has. You can use
this to troubleshoot certain issues as it will
quickly tell you which machine controls are
on and which are off.
The About menu lists the model number,
serial number, and software version of your
machine.
The Settings menu allows you to customize
the InfoCenter display.
Description
Lists the total number of hours that the
machine has been turned on.
Lists the total number of hours that the reel
has been turned on.
Lists the instantaneous power delivered by
the battery in Watts.
Lists the current battery charge as a percent
of capacity.
Lists the instantaneous current delivered by
the battery in Amps.
Lists the battery potential in volts.
Lists the total energy delivered by the battery
over its entire life in watt-hours.