Introduction; Overview; Control Libraries; Operating Environment - Entrust SR200 Sdk Manual

Introduction

Overview

This document explains the application programming interface (API) for the SR200
& SR300 printer drivers.
Use the information to develop applications that use the SR200 printer or the
SR300 printer. When you install the printer driver, the Printer Control DLL, required
for the API (and printer driver), is also installed. You can use the printer driver and
an existing application to print and encode. You can also use the Printer Control
DLL directly without using the printer driver. This guide explains how to use Printer
Control DLL, and how to do smart card and magnetic stripe encoding with printer
driver.

Control Libraries

For the SR200/SR300 printer, the Printer Control DLL (PCP21CT.DLL) is part of
the USB driver. The API for the SR200/SR300 described in this document can be
used only with the USB driver and a USB connection.
The DLL is installed as part of driver installation.

Operating Environment

The following table shows the supported operating environment of the printer driver
and API.
Item
Windows 7 (32-bit and 64-bit)
Windows Vista (Service Pack 1 or later, 32 bit only)
Operating
Windows 2000 Professional (Service Pack 4 or later, 32 bit)
System
Windows XP Professional (Service Pack 2 or later, 32 bit only)
Windows Server 2003 (R2 Service Pack 2 or later, 32 bit only)
Peripheral SR200 or SR300 Card Printer
The API uses the C programming language.
SR200 & SR300 Printer SDK Guide
Contents
Note
Connect the card
printer to the PC
with a USB cable.
Page 1