Page 2
Warning: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. For more information on this warning, refer to: www.datacard.com/califpropwarning.
Contents Step 1: Prepare the Printer ................. 2 Step 2: Plug In and Power On the Printer ............4 Step 3: Set Up the PC ..................5 Step 4: Install the Printer (USB): Install a USB Printer ................7 (Network): Install a Network Printer ............9 Step 5: Print a Sample Card ................
Step 3: Set Up the PC Network Do not plug in the USB cable until prompted.
Page 8
Step 3: Set Up the PC—cont. Continue with “Step 4 (USB): Install a USB Printer” on page 7 OR “Step 4 (Network): Install a Network Printer” on page 9.
Step 5: Print a Sample Card Please complete a brief survey about your product installation experience at: https://www.datacard.com/datacard-product-installation-report...
Page 16
Entrust, Sigma and the hexagon design are trademarks, registered trademarks and/or service marks of the Entrust Corporation in the United States and other countries. Datacard is a registered trademark and service mark of Entrust Corporation in the United States and other countries. All other trademarks are the property of their respective owners.
Need help?
Do you have a question about the SD160 and is the answer not in the manual?
Questions and answers