Entrust SR200 Sdk Manual page 41

Encode Unit Data (Page Code=0x2a)
Bit
7
Byte
0 0
1 Page Specific Parameter Length (0x08)
2 ISO Mode
3 JIS Mode
Reserved (0xFF)
4～6
7
Write Retry
8 Reserved (0xFF)
9 Reserved (0xFF)
ISO Mode ISO (3-track) magnetic stripe encoder coercivity setting:
0 Lo-Co (300 Oe)
JIS Mode Coercivity of JIS MG head.
0 Lo-Co (300 Oe)
Write Retry Retry count for reading and writing magnetic stripe data, when it fails.
Possible values are from 0 to 3.
Tips for success
♦
If the printer does not have a magnetic stripe encoder, use 0 as the ISO Mode
value.
♦
The contents of the Encode Unit Data page are always kept in the EEPROM. If
a value is 0xff, it keeps the settings that are in the EEPROM. Other items are
not changed.
♦
The settings will be effective with the next card printed.
6 5 4
0 Page Code (0x2a)
SR200 & SR300 Printer SDK Guide
3 2 1
1 Hi-Co (2750Oe)
1 Hi-Co (2750Oe)
0
Page 36