Javad GISmore Operator's Manual page 24

Description and Operation
GISmore Configuration
Configuring Receiver
7. Open Advanced tab, and then Multipath Reduction subtab. Activate Code multipath reduction
(mpnew) on base and rover for DGPS mode.
For RTK DGPS mode activate Carrier multipath reduction (mpnew) as well (Figure 12).
8. Click Apply, to save the made changes and settings into receiver's memory and close the dialog
window. The receiver configuration will be kept in the receiver till you will change them or will
clear NVRAM. For detailed description of settings and parameters see NetView Software Manual.
24
Figure 11. Ports tab
Figure 12. Multipath Reduction
www.javad.com