Fx Generator Guidelines - Elation PROTEUS RAYZOR 1960 User Manual

Table of Contents

F X G E N E R AT O R G U I D E L I N E S

Selection and control of the integrated FX on the Proteus RAyzor 1960 is found in the Main

Fixture section. All FX are available, even in the DMX control modes with the lowest channel

count. For your convenience, these functions are summarized below. Please refer to the DMX

Traits section of this manual for detailed information.

FX for RGBW and Spark LED contain a selection channel to recall the desired pattern. The

pattern direction and speed is then adjusted using the associated Speed channels. FX can run

in forward or reverse, and can also be frozen at any time by using "Stop". The FX tables show

the available patterns which are grouped for easier browsing. The first 10 DMX steps of the

FX channel are used to change the type of curve for smooth or stepped FX. Once a curve is

selected, it will be used for all FX recalled afterwards. When programming cues for fixtures,

the user must make sure to change the curve first before selecting the pattern. The fixture

defaults to the Sinewave pattern after every power cycle. See the Waveforms section of

this manual for the available waveforms.

DMX VALUES

FUNCTION

RGBW FX (see RGBW Pixel FX

000 - 255

Table section of this manual)

RGBW FX Speed

000 - 126

Reverse, fast to slow

127 - 128

Stop

129 - 255

Forward, slow to fast

Spark LED FX (see Spark LED