Fx Generator Guidelines - Elation PROTEUS RAYZOR 760 User Manual

F X G E N E R AT O R G U I D E L I N E S
Selection and control of the integrated FX on the PROTUES RAYZOR 760 is found in the Main
Fixture section. All FX are available even in the smallest DMX control modes. (see below)
DMX VALUES
000 - 255
000 - 126
127 - 128
129 - 255
000 - 255
000 - 126
127 - 128
129 - 255
FX for RGBW and SparkLED contain a selection channel to recall the desired pattern. The
pattern direction and speed is then adjusted using the associated Speed channels. FX can run
forward or reverse and can also be frozen at any time by using "Stop". The FX tables show
the available patterns which are grouped for easier browsing. The first 10 DMX steps of the
FX channel are used to change the type of curve for smooth or stepped FX. Once a curve is
selected, it will be used for all FX recalled afterwards. When programming curves for fix-
tures, the user must ensure to change the curve first before selecting the pattern. The fix-
ture defaults to the Sinewave pattern after every power cycle. (see below)
FUNCTION
RGBW FX Selection, 1 - 255 (see RGBW FX Table)
RGBW FX Speed
Rev, fast to slow
Stop
Slow to fast
Spark LED FX Selection, 1 - 255, (see Spark LED FX Table)
Spark LED FX Speed
Rev, fast to slow
Stop
Slow to fast
Sinewave
(default)
Step
Sawtooth
Ramp Up
Ramp Down
!
Ramp Up
!
41