Control Panel - Elation PROTEUS RAYZOR 1960 User Manual

C O N T R O L P A N E L
This fixture features an easy to navigate system menu. The control panel located on the front
of the fixture (see image below) provides access to the main system menu and is where all
necessary system adjustments are made to the fixture. During normal operation, pressing
the MODE/ESC button once will access the fixture's main menu. Once in the main menu, you
can navigate through the different functions and access the sub-menus with the UP, DOWN,
RIGHT, and LEFT buttons. Once you reach a field that requires adjusting, press the ENTER
button to select that field and use the UP and DOWN buttons to adjust the setting options
for that field. Pressing the ENTER button once more will confirm your setting. You may exit
the main menu at any time without making any adjustments by pressing the MODE/ESC but-
ton.
To access the LCD Menu Control Display via the internal battery, press and hold the MODE/
ESC button for 10 seconds. The LCD Menu Control Display will shut OFF automatically about
1 minute from the last button press.
BATTERY
This unit features a dedicated battery that can be used to power the screen display. This
allows the user to configure the device's channel mode, DMX address, or any other screen-
accessible features without needing to power on the device or even connect it to a power
source. To activate the display on battery power, press and hold the MODE button for 3 sec-
onds.
23