Connecting - Siemens SIDOOR AT40 System Manual

Procedure
Proceed as follows to install the transformer:
Steps
1. Drill the hole for the screw
2. Secure the transformer with 1 screw
7.2.3

Connecting

Slots
The slots for the SIDOOR TRANSFORMER are as follows:
Controller
SIDOOR AT40 / ATD400V
AT40 and ATD400V for elevators
System Manual, 06/2022, A5E42192709-AH
in the dimension drawing.
(M6, minimum length 70 mm)
a flat metal surface.
Figure
①
as shown
①
on
Slot
Power supply
7.2 SIDOOR TRANSFORMER
125