Table of Contents
Advertisement
DRIVER ASSISTANCE
Park Assist System
The Park Assist System (PAS)* uses
ultrasonic sensors to indicate if there
are any objects close to the front and
rear of the vehicle when parking or
manoeuvring.
The PAS automatically activates when
reverse gear is selected, operating at
any speed in reverse and when driving
forward at low speed up to 7mph.
90
When active, an image of the vehicle
is shown in the centre display, sensor
fields indicate any objects that are
detected and their proximity relative to
the vehicle.
An audio feedback signal will sound, in-
creasing in frequency if any objects are
detected within the path of the vehicle.
The active sensor field closest to the
vehicle image changes colour from
white – yellow – amber and then red as
the object becomes closer.
All other audio feedback from the info-
tainment system will reduce in order to
prioritise the warning for the PAS.
Tap the button on the display to turn
the sound on or off as required.
Unless the rear PAS detects an object
within the red zone, The audio feed-
back will turn off once the vehicle has
remained stationary for 2 seconds.
PAS is active during start/stop driving,
but will deactivate if the parking brake
is applied, or for automatic vehicles, P –
Park is selected.
*PAS is an optional feature and may
not be fitted to your vehicle.
WARNING: These features are
only aids to parking and are
not a substitute for vigilant all-
round observation. The driver is
responsible for safe manoeuvring
and driving safely at all times.
WARNING: Take time to familiarise
yourself with the PAS audio
feedback and the actual distance
being detected before fully
utilising this system.
Advertisement
Table of Contents
