System Malfunction; Tpms Sensor Renewal Intervals; Calibrating Tyre Pressure Monitoring Sensor - Lotus EMIRA 2022 Owner's Handbook Manual

Hide thumbs Also See for EMIRA 2022:
Table of Contents

Advertisement

VEHICLE CARE

System Malfunction

If a malfunction is detected within
the tyre pressure monitoring system,
the
warning symbol will flash for
approximately one minute and then
remain continuously illuminated and a
warning message shown in the driver's
display screen.
When the malfunction indicator is
illuminated, the system may not be
able to detect or signal low tyre
pressure as intended.
Malfunctions may occur for a variety
of reasons, including the installation
of replacement or alternate tyres or
wheels on the vehicle that prevent the
system from functioning properly.
Always check the
after replacing one or more tyres or
wheels on your vehicle to ensure that
the replacement of alternate tyres and
wheels allow the tyre pressure
monitoring system to continue to
function properly.
206

TPMS Sensor Renewal Intervals

The sensors are powered by integral
batteries, with an average service
life of 5 years. It is recommended to
renew all pressure sensors at this time
interval.
Calibrating Tyre Pressure Monitoring
Sensor
After the fitment of a new sensor or
wheel removal/refitment the tyre
pressure monitoring symbol will be
illuminated in the driver display.
Driving the vehicle with the tyres at the
correct pressures for a short period of
time will allow the sensor to calibrate
to the tyre pressure monitoring system
and the symbol will extinguish.
warning symbol
A guided routine to calibrate the sen-
sor pressure is available from the app
launcher screen in the central display,
see page 102. Tap on the
follow the onscreen instructions.
Wheels
Ensure that only original equipment, or
Lotus approved wheel, tyre and wheel
bolt combinations are fitted.
After striking a pothole or kerb, the
wheels should be removed and the
wheel and tyre thoroughly inspected
for damage. If necessary, renew the
wheel and/or tyre.
Safety should always be the first
consideration and new parts fitted in
any cases of doubt.
WARNING: Using incorrect, or
non-approved replacement wheels
or wheel locks could be dangerous.
It could affect the braking and
handling of the vehicle, or cause
tyre deflation and result in an
accident.
button and
WARNING: Putting a used wheel
on a vehicle is dangerous. It may
have structural damage which
cannot be seen and lead to
breakage causing an accident.

Advertisement

Table of Contents
loading

Table of Contents