Table of Contents
Advertisement
WINDSCREEN, WINDOWS, MIRRORS AND SUN VISORS
Rain Sensor Wiping
The windscreen wipers activate auto-
matically relative to the intensity of any
rainfall sensed on the windscreen.
Activate the rain sensor by pressing the rain
sensor button
.
Activate the rain sensor by pressing the rain
The rain sensor is activated when the
sensor button
.
Move the lever down to make the wipers
ignition is set to I or II with the wiper
move.
Move the lever down to make the wipers
stalk in AUT position.
move.
Turn the thumbwheel upward for higher sensi-
tivity and downward for lower sensitivity. An
Turn the thumbwheel upward for higher sensi-
The rain sensor symbol illuminates in
extra sweep is made when the thumbwheel is
tivity and downward for lower sensitivity. An
the driver display when the function is
turned upward.
extra sweep is made when the thumbwheel is
activated.
turned upward.
Deactivating the rain sensor
Deactivate the rain sensor by pressing the rain
Deactivating the rain sensor
Press the
button to activate the rain
sensor button
or moving the stalk
Deactivate the rain sensor by pressing the rain
sensor, the
symbol in the driver's
switch up to another wiper program.
sensor button
or moving the stalk
display will also illuminate.
switch up to another wiper program.
The rain sensor is deactivated automatically in
ignition position 0 or when the engine is
The rain sensor is deactivated automatically in
switched off.
ignition position 0 or when the engine is
switched off.
The rain sensor is deactivated automatically
when wiper blades are set in service position.
The rain sensor is deactivated automatically
The rain sensor is reactivated when service
when wiper blades are set in service position.
mode has been deactivated.
The rain sensor is reactivated when service
124
mode has been deactivated.
IMPORTANT
on the right-hand stalk switch.
Rotate the ring on the end of the stalk,
upwards for greater sensitivity and
downwards for less sensitivity. An extra
sweep of the wiper blade is made when
the ring is rotated upwards.
WARNING: Do not use the rain
Right-hand stalk switch.
sensing function if there is the
Rain sensor button
potential risk that rain or washer
Thumbwheel sensitivity/frequency
fluid could freeze on the
WINDOWS, GLASS AND MIRRORS
windscreen, this may obscure your
When the rain sensor is activated, the rain
vision.
sensor symbol
Using the rain sensor
display.
The rain sensor automatically starts the wind-
Automatic Car Washes
screen wipers based on how much water it
Activating the rain sensor
detects on the windscreen. Rain sensor sen-
When activating the rain sensor, the car must
CAUTION: The windscreen wipers
sitivity can be adjusted with the thumbwheel
be running or in ignition position I or II while
Related information
could start sweeping and become
on the right-hand stalk switch.
the windscreen wiper stalk switch is in posi-
Using windscreen and headlamp washers
•
Related information
damaged in an automatic car
tion 0 or in the position for a single sweep.
(p. 167)
Using windscreen and headlamp washers
•
wash. Ensure that the rain sensor
Using automatic rear windscreen wiping
(p. 167)
•
function is deactivated when the
when reversing (p. 169)
Using automatic rear windscreen wiping
•
engine is running or when the
when reversing (p. 169)
Wiper blades and washer fluid (p. 164)
•
vehicle›s electrical system is in
166
Using the rain sensor's memory function
Wiper blades and washer fluid (p. 164)
•
•
ignition position I or II. The
(p. 167)
symbol in the driver display is
Using the rain sensor's memory function
•
(p. 167)
Using the rear window wiper and washer
extinguished when the vehicle is in
•
(p. 168)
Using the rear window wiper and washer
an automatic car wash.
•
(p. 168)
Filling washer fluid (p. 624)
•
Filling washer fluid (p. 624)
•
Set the wiper blades in service position
•
Right-hand stalk switch.
(p. 623)
Set the wiper blades in service position
•
Rain sensor button
(p. 623)
Replacing windscreen wiper blades
•
(p. 622)
Replacing windscreen wiper blades
•
Thumbwheel sensitivity/frequency
(p. 622)
Replacing the wiper blade, rear window
•
When the rain sensor is activated, the rain
(p. 621)
Replacing the wiper blade, rear window
•
sensor symbol
is shown in the driver
(p. 621)
Using windscreen wipers (p. 165)
•
display.
Using windscreen wipers (p. 165)
•
Activating the rain sensor
When activating the rain sensor, the car must
be running or in ignition position I or II while
Turn the thumbwheel upward for higher sensi-
tivity and downward for lower sensitivity. An
extra sweep is made when the thumbwheel is
turned upward.
Deactivating the rain sensor
Deactivating Rain Sensor Wiping
Deactivate the rain sensor by pressing the rain
Press the
sensor button
wiper stalk upwards to another wiper
switch up to another wiper program.
setting.
The rain sensor is deactivated automatically in
ignition position 0 or when the engine is
switched off.
In ignition position 0 or when the en-
The rain sensor is deactivated automatically
gine is switched off it is automatically
when wiper blades are set in service position.
deactivated.
The rain sensor is reactivated when service
mode has been deactivated.
is shown in the driver
Activate the rain sensor by pressing the rain
The windscreen wipers could start and be
damaged in an automatic car wash. Deac-
sensor button
.
tivate the rain sensor while the car is run-
Move the lever down to make the wipers
ning or when the car's electrical system is
move.
in ignition position I or II. The symbol in the
Turn the thumbwheel upward for higher sensi-
driver display extinguishes.
tivity and downward for lower sensitivity. An
extra sweep is made when the thumbwheel is
turned upward.
Deactivating the rain sensor
Deactivate the rain sensor by pressing the rain
sensor button
or moving the stalk
switch up to another wiper program.
The rain sensor is deactivated automatically in
ignition position 0 or when the engine is
switched off.
The rain sensor is deactivated automatically
when wiper blades are set in service position.
The rain sensor is reactivated when service
mode has been deactivated.
IMPORTANT
The windscreen wipers could start and be
damaged in an automatic car wash. Deac-
tivate the rain sensor while the car is run-
ning or when the car's electrical system is
in ignition position I or II. The symbol in the
button again or move the
or moving the stalk
IMPORTANT
Related information
Using windscreen and headlamp washe
•
(p. 167)
Using automatic rear windscreen wiping
•
when reversing (p. 169)
Wiper blades and washer fluid (p. 164)
•
Using the rain sensor's memory function
•
(p. 167)
Using the rear window wiper and washe
•
(p. 168)
Filling washer fluid (p. 624)
•
Set the wiper blades in service position
•
(p. 623)
Replacing windscreen wiper blades
•
(p. 622)
Replacing the wiper blade, rear window
•
(p. 621)
Using windscreen wipers (p. 165)
•
Wiper blades
•
Using the rain
•
(p. 167)
Using the rea
•
(p. 168)
Filling washe
•
Set the wiper
•
(p. 623)
Replacing win
•
(p. 622)
Replacing the
•
(p. 621)
Using windsc
•
Advertisement
Table of Contents
