Table of Contents
Advertisement
STARTING AND DRIVING
P – Park
With the vehicle stationary, apply the
parking brake and press the P button
behind the gear selector to activate
Park mode. Move the selector lever
forward/rearward once to deactivate
park mode.
WARNING: Always apply the park-
ing brake as well as selecting P to
keep the vehicle stationary.
CAUTION: To avoid engine and
transmission damage, the vehicle
must be stationary before selecting
P.
158
N
NOTE: To lock the vehicle and arm
the alarm, the transmission must
N
be in P.
NOTE: If the engine is switched off
and a door is opened, an audible
warning will sound to remind you
to select P.
Automatic Park Activation
Park will automatically be selected:
– When the engine is switched off in
position D or R.
– The driver unfastens their seatbelt
and opens the driver's door when the
engine is running in any other gear.
R - Reverse
Firmly depress the footbrake and select
R to reverse the vehicle. Always stop
the vehicle completely before selecting
R. The park assist camera will also
automatically* activate showing the
view from the rear of the vehicle in the
centre display.
*Dependent on market.
N – Neutral
No gear is engaged with neutral
selected. Only select N when the
parking brake is applied and the
vehicle is stationary. The engine can
also be started when the transmission
is in neutral.
Neutral can also be selected from any
gear by simultaneously pulling both
N
steering wheel mounted paddle shifters
towards the driver.
NOTE: The brake pedal must be de-
pressed and the ignition must be in
mode II before you can select any
other gear from N.
D – Drive
Depress the brake pedal and select D
only when the vehicle is stationary to
engage forward gears.
Gear changing shifting points are
controlled by information received
by the vehicle's engine management
systems.
Advertisement
Table of Contents
