Table of Contents
Advertisement
If all of the preparation and activation
conditions are met, the upper drive
mode indicator lines change to white
in colour, converting almost
instantaneously into a launch timer.
The launch timer continues counting
down.
Once launch mode is ready
displayed.
Release the brake pedal with your
left foot whilst continuing to keep the
accelerator pedal firmly depressed.
The vehicle will perform a launch start,
providing maximum acceleration.
Further controlled launches can be
performed after the engine oil, coolant
and transmission fluid return to their
normal operating temperature range.
Deactivating Lotus Launch Control
Whilst Accelerating
Release the accelerator pedal or apply
the brake pedal.
Whilst Stationary
Release the accelerator pedal or wait
for approximately 5-10 seconds until
launch control is deactivated. The
message 'Launch Mode aborted' will be
shown on the Driver Display.
Or
If one or more of the launch control
parameters as shown on page 70 are
no longer met.
is
LAUNCH
DISPLAYS, WARNINGS AND GAUGES
71
Advertisement
Table of Contents
