Table of Contents
Advertisement
User manual - China CX11 Non-electric, S002517, 9.00, en-US, Approved, 2017-12-07 12:06.
risk. Make sure the fault is corrected before driving. If you are not
clear about the fault, consult a Lynk & Co Center for inspection.
Warning symbol in red : The warning indicator alerts
you that an important function is activated or that a
serious fault has occurred that may affect the vehicle's
drivability. The warning symbol can also illuminate in
conjunction with other indicators.
Low engine oil pressure : This indicator warns of low
engine oil pressure. If the indicator illuminates during
normal driving, find a safe place and stop the vehicle
immediately, contact a Lynk & Co Center for inspection.
SRS airbag fault : If this warning indicator illuminates
during driving, it means a fault has been detected in
Trip A Reset
the front airbags, side airbags or inflatable curtain
Pressing the reset button on the end
and/or pre-tensioner systems. If this happens, contact a
Lynk & Co Center for inspection.
of the light switch will reset all infor-
Front passenger airbag on : The front
mation stored in the Trip A trip meter
passenger airbag is activated and adults
(trip distance, average fuel consump-
can sit safely in the front passenger seat.
tion and average speed). A notification
Never sit a child on a booster cushion, in a
child seat or in a rear-facing child seat on the front passenger seat
message will briefly appear in the driv-
if the airbag is activated.
er's display showing that trip meter 1
Front passenger airbag off : The front passenger
has been reset.
airbag is deactivated and children shorter than 140 cm
in a child seat can sit in the front passenger seat. It is
safer when the child is properly secured in the rear
Also see page 74 for further informa-
seats.
tion on trip meter options and resetting
Seat belt reminder : The indicator illuminates if the seat
using the right-hand steering wheel
belt is unfastened in the driver or front passenger seat.
keypad.
Battery charging fault : If this warning indicator
illuminates while the engine is running, it may indicate
the charging system is not functioning properly. Please
switch off all the unnecessary electrical equipments,
contact a Lynk & Co Center for inspection.
Brake fault : The warning indicator illuminates if there is
a fault in the brake system (e.g. low brake fluid).
Contact a Lynk & Co Center for inspection.
Anti-lock braking system fault : If the warning indicator
illuminates when the engine is running or during
driving, there may be a fault in the Anti-lock braking
system. Contact a Lynk & Co Center for inspection.
Brake light fault : The indicator illuminates when there is
a fault in the brake lights system. Contact a Lynk & Co
Center for inspection.
Hazard Warning Lights
To Activate: Press the
in the centre
console. The switch, direction indicator
Direction indicator fault : The indicator illuminates when
there is a fault in the direction indicators system.
lamps and
symbols in the driver's
Contact a Lynk & Co Center for inspection.
display will flash.
Coolant temperature : This indicator illuminates when
To Deactivate: Press a second time to
the engine is overheating. If this happens, turn off the
switch off.
air conditioning and let the engine idle for a while. If the
indicator remains illuminated, stop the vehicle safely
and contact a Lynk & Co Center.
WARNING: If stopped for an
Steering assist fault : The indicator illuminates when
emergency, move the vehicle off
there is a fault in the power steering assist system.
the road, switch on the hazard
Contact a Lynk & Co Center for inspection.
warning lights and mark the
vehicle with other warning devices
as available to reduce the risk of a
collision.
N
LIGHTING
NOTE: Use of the hazard warning
lamps may be subject to local
traffic laws.
69
117
Advertisement
Table of Contents
