Table of Contents
Advertisement
15. Press the
on-off button to start
the compressor.
Correct Tyre Pressure Not Achieved
See page 204.
Correct Tyre Pressure Achieved
If the tyre has reached the correct
pressure:
16. Switch off the compressor using
the
on-off button, disconnect the
sealant tube from the tyre valve,
remove the speed sticker from the
side of the sealant canister and put
in the vehicle cabin where it can be
easily seen.
17. Disconnect the compressor con-
nector from the 12V auxiliary power
socket, press the button on the side
of the compressor to detach the
tyre sealant bottle and refit the tyre
valve cap.
18. Refit the compressor and tyre seal-
ant bottle into the kit box and refit
securely back into place within the
luggage compartment.
19. You can continue driving, but do not
exceed 50 mph. Do not accelerate
or brake suddenly.
20. After driving for about 5 miles,
stop the vehicle in a safe place and
engage the handbrake.
VEHICLE CARE
21. Take out the kit and reconnect the
compressors electrical connector
into the 12V power socket in the
vehicle, ensuring that the on-off
button is set to off.
22. Remove the cap from the repaired
tyre valve, take out the black
inflation tube from around the
compressor base and firmly tighten
the tube connector into the valve.
23. Check the pressure gauge for the
correct tyre pressure reading.
203
Advertisement
Table of Contents
