Table of Contents
Advertisement
Centre Display
Additional climate control settings,
as well as those also activated by the
switches can be controlled from the
centre display screen.
1.3.1.3 Activating Partial Mode
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
Presets Bar
consumption of the infotainment system by shutting off certain functions that consumes
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see "1.5.2 Partial Mode" on page 104 for more details.
From the side bar of the centre display,
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
select: Global Settings/App options >
home button will deactivate partial mode and return the driver to the previous view.
Cover Flow
1.3.1.3 Activating Partial Mode
Car > Climate.
Partial mode is used when the fuel efficiency of the car is tested. It reduces the energy
consumption of the infotainment system by shutting off certain functions that consumes
Fig. 1
Fig. 2
more energy, e.g. WiFi, Bluetooth the screen will also be set to the lowest display
brightness, see "1.5.2 Partial Mode" on page 104 for more details.
A
Recirculation Timer:
Simply tap and hold the home button for 5 seconds to activate partial mode. Tapping the
home button will deactivate partial mode and return the driver to the previous view.
Automatic cancellation 30
minutes after activation.
Fig. 1
Fig. 2
Tap and Hold
5 seconds
B
Fan Intensity Auto Mode:
Low, medium and high intensity
level options.
Tap and Hold
C
5 seconds
Auto Rear Defrost:
Heated rear screen automatically
activates below temperatures of
7°C.
D
Auto Start Seat Heating:
Available when in ignition mode
II (active), set the duration period
of automatic seat heating.
See page 99 for information on the
centre display screen.
3.4.7.9 Cover flow (1/3)
Recirculation timer
Navigate through a list of content
Recirculation will be turned off after 30 minutes
ID i.A
ID i.B
Fan intensity auto mode
Primary text
Low
80
80
Text
Auto rear defrost
Text
TITLE
STATUS INFO
Starts at temperature below 7° C
Fig. 3
INFO
Text
Tap the required climate option.
Fig. 3
Tap Interaction
Use the slide button to activate
the preset.
Within the cover flow template the user
If preset levels are available, tap
can navigate left/right with CLICK or SWIPE
If the selected item in the list is the first
horizontally left/right to select next/
on the toggle buttons to select the
or last one, then this is indicated by only
previous item in a list. SWIPE right (SR_I)
Tap Interaction
showing two items. ID i.D shows when the
level required.
means that the user goes one step right
first item in the list is selected
and SWIPE left (SL_I) means that the user
go one step left. See chapter
3.2.4.1 PA and
It is possible to use SWIPE to quickly step
condition - touch
event). And then interact
Seat Heating
between next/previous item in the list.
with the selected item using CLICK the
center button.
See page 149 for further information on
The purpose of this document is to explain further the HMI interaction. The information provided in this document is intended for informational purposes only and is subject to change as version numbers of
using the toggle buttons to change the
this document di er. CEVT may also make improvements and/or changes in the product and the programs described in this information at any time without notice.
COPYRIGHT CEVT [2018] AND/OR LICENSED TO CEVT. ALL RIGHTS RESERVED.
seat heating levels.
Climate Settings
A
Auto start seat heating
B
1.3. GENERAL USER INTERACTIONS
Primary text
Medium
80
High
D
80
Text
Timer
C
Text
1.3. GENERAL USER INTERACTIONS
TITLE
STATUS INFO
INFO
Text
57
57
CLIMATE CONTROL
DCY11_UX_Framework
Driver
Passenger
5 min
15 min
30 min
Pg. 95
TABLE OF CONTENT
147
Advertisement
Table of Contents
