Table of Contents
Advertisement
Ignition Modes
To change the ignition mode from
mode 0 (inactive, with the vehicle un-
locked and driver's door opened), press
the START/STOP ENGINE button WITH-
OUT depressing the clutch (manual
powertrain vehicles) or brake pedal
(automatic powertrain vehicles).
Ignition mode I (Convenience)
With the keyfob detected, a brief press
on the START/STOP ENGINE to change
to mode I from 0.
Ignition mode II (Active)
With the keyfob detected, a long press
on the START/STOP ENGINE for around
5 seconds to change to ignition mode
II from modes 0 or I.
Electronic Steering Column Lock
When the ignition is in mode 0,
(inactive) and the vehicle is stationary,
the electronic steering column lock will
activate (lock), when:
– The vehicle is locked using the
keyfob.
– A certain time period has elapsed
with the ignition in mode 0.
– The vehicle is not started within a
certain time period after unlocking
the vehicle.
Ignition Mode
Systems Available
0 - Inactive
Some electrical functions can be used in this mode
within a limited time period. The clock, audio infotain-
ment and position lights can be used. The electronic
steering column lock is also deactivated (unlocked).
I - Convenience
Certain convenience functions can now be operated,
such as the power windows, phone, etc.
II - Active
Exterior lights can be operated. The electrical
systems will perform self-checks and the warning
alerts symbols will illuminate in the driver display for
approximately 3 - 6 seconds. Most electrical controls
can now be operated.
STARTING AND DRIVING
153
Advertisement
Table of Contents
