Motor Operation; Operating The Actuator From Local Controls - AUMA SAEx 07.2 Manual

Operation
7.2.

Motor operation

7.2.1.

Operating the actuator from local controls

36
SAEx 07.2 SAEx 16.2 / SAREx 07.2
Figure 35: Handwheel without/with overload protection
[1] Handwheel without overload protection (standard)
[2] Handwheel with overload protection/safety hub (option)
Valve damage due to incorrect basic setting!
Prior to electric actuator operation, perform the basic settings for "type of seating"
and "torque switching".
Local actuator operation is performed using the local controls push buttons of actuator
controls.
Figure 36: Local controls
[1] Push button for operation command in direction OPEN
[2] Push button STOP
[3] Push button for operation command in direction CLOSE
[4] Push button RESET
[5] Selector switch
SAREx 16.2 Control unit: electronic (MWG)
ACExC 01.2 Non-Intrusive Modbus TCP/IP