Industrial Ethernet Cable: Connect - AUMA SAEx 07.2 Manual

SAEx 07.2 SAEx 16.2 / SAREx 07.2
ACExC 01.2 Non-Intrusive Modbus TCP/IP
6.2.3.

Industrial Ethernet cable: connect

Information
Cable connection
SAREx 16.2 Control unit: electronic (MWG)
In case of a fault, electric shock due to presence of hazardous voltage if the
PE conductor is NOT connected!
Risk of death or serious injury!
Connect all protective earth conductors.
Connect PE connection to external protective earth conductor of connecting
cables.
Start running the device only after having connected the protective earth con-
ductor.
6.
Firmly tighten protective earth to PE connection (symbol:
Figure 27: Protective earth (PE)
[1] U-bracket for PE connection
This description applies to the connection via CAT 6
Figure 28: TCP/IP-RTU gateway
[1] RJ-45 plug-in socket for connecting the Industrial Ethernet cable
[2] Power supply
1. For connecting cables to RJ-45 connectors, proceed in compliance with the
connector manufacturer specifications.
When using the RJ-45 connector supplied by AUMA, please heed the assembly
instructions provided.
2. Connect RJ-45 connector to port for Ethernet cable [1].
Electrical connection
).
Ethernet cables.
A
31